Loading ...
Loading ...
Loading ...
NOTE: The fan weight is 18.52 lbs (8.4 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN
SAVE ALL INSTRUCTIONS.
Hanger Pin
Lock Pin
Fig.5
Installation Steps :
Fig.1
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
Canopy
Canopy Cover
Downrod Stand
Cover
Downrod Motor Wires
Collar
Fig.6
(For downrod mount only):
Thread the motor wires
through the downrod stand
cover, decorative cap
(Making sure the smooth
side of decorative cap is
facing downward.),
canopy and downrod.
Tighten the hanger bracket to the outlet
box with two mounting screws. (To reduce
the risk of fire, electric shock, or personal
injury, mount to an outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For slope ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
(For
downrod
mount only):
Remove the lock pin and take off
the hanger pin.
(For downrod mount only):
Loosen the collar screws
out part way.Insert the
downrod into the collar.
Slide hanger pin through
holes of collar and downrod.
Canopy
Canopy Cover
Downrod Stand
Cover
Downrod
Motor Wires
Collar
Hanger Pin
Fig.7
Fig.3
Canopy
Housing
Fig.4
Hanger Bracket
Hook
(For ceiling mount only):
Remove the canopy cover from the
canopy.
Remove downrod stand cover and
three of six screws (every other one)
securing the motor collar to the top
of the fan motor housing. Attach the
canopy to the housing with three screws.
(
For ceiling mount only):
Raise the fan and place the canopy
on the hanger bracket hook for wiring.
Go to Fig.10 for the next steps.
PAGE: 5 / 12
201202
Loading ...
Loading ...
Loading ...