Loading ...
Loading ...
Loading ...
Wrap the Piping
1. Use the insulation sleeve to wrap the joint part of the indoor unit and the
connection pipe. Then use the insulating material to pack and seal insulation
pipe, to prevent generation of condensate water on the joint part.
2. Connect the water outlet with drainpipes, and make the connection pipe,
cables, and the drain hose straight.
3. Use plastic cable ties to wrap the connecting pipes, cables and drain hose. Run
the pipe sloping downward.
Fixing the Indoor Unit
1. Hang the indoor unit on the peg board and move the unit from left to right to
ensure that the hook is properly positioned in the peg board.
2. Push toward the lower left side and the upper right side of the unit toward
the peg board, until the hook is embedded in the slot and makes a “click”
sound.
INSTALLATION: INDOOR UNIT
12
Connecting Pipe, Drain
Hose, and Cables
Plastic Strap
Loading ...
Loading ...
Loading ...