Loading ...
Loading ...
Loading ...
maintenance
I WARNING: For your own safety, turn switch
"Off" and remove plug from power source outlet
before maintaining or lubricating your drill press.
Frequently blow out any dust that may accumulate in-
side the motor.
A coat of automotive type paste wax applied to the
table and column will help to keep the surfaces
clean.
WARNING: To avoid shock or fire hazard, if the
power cord is worn or cut, or damaged in any
way, have it replaced immediately.
_wGREEN iRE 8LACK, __
CONN
Wiring Diagram
lubrication
All of the BALL BEARINGS are packed with grease at
the factory, They require no further lubrication.
Periodically lubricate the SPLINES (grooves) in the
spindle, and the RACK (teeth of the quill).
SPINDLE ASSEMBLY
OF DRILL PRESS
1_.,,------ SPLINES
H (GROOVES)
Sears Recommends the Following Accessories
Drill Bits ......................... See Catalog
Drill Press Vises ................... See Catalog
5 pc, Stop Collar Set ............... See Catalog
Sanding Drums ................ 9-2497 -- 9-2498
I5 Piece Drum Sanding Kit .......... See Catalog
Buffing Wheels up to 4" dia. max...... See Catalog
Power Tool Know-How Handbook ........ 9-291 !7
Sears may recommend other accessories not listed in
the manual.
See your nearest Sears store for other accessories.
Do not use any accessory unless you have received
and read complete instructions for its use.
22
Loading ...
Loading ...
Loading ...