Loading ...
Loading ...
Loading ...
PAGE: 7 / 11
191227
Remove screws from connect plate
of fan light first, then connect the
white (neutral) wire from the fan
light to white (neutral) wire from
connect plate of fan light with a wire
connector, connect the black (hot)
wire from fan light to blue (hot) wire
from connect plate of fan light with
a wire connector.
Carefully put the wires into the
connect plate of fan light , then
attach the fan light onto the connect
plate of fan light with the connect
plate screws.
Install LED bulbs (included).
See relamping label at socke area or
packaging for maximum allowed wattage.
Fig.20
Turn on the electric power at the main
fuse or circuit breaker box.
The slide switch on fan motor assembly sets direction of
fan rotation. Select the desired direction of fan rotation.
Push the slide switch left for " Forward" and right for "Reverse".
Note: Wait for fan to stop before reversing the direction
of blade rotation.
Attach the canopy to the hanger
bracket, and then secure it with
four screws and washers.
Washer
Canopy
Fig.13
Hanger
Bracket
Screw
Blade Screw
Washer
Fig.14
Blade
Slot
Insert the Blade through the slot on
the Center Band. Align holes and
fasten Blade to the motor with
Blade Screws and washers.
Repeat for remaining Blades.
Fig.18
3-4W E12 (C)
Base B10 Type
LED Bulbs
(included)
E12 B10 bulb Max. 40W
Fig.19
Slide Switch
Reverse
Forward
Fan Motor
Assembly
Connect Plate of Fan Light
Fan Motor
Assembly
Screw
Fig.15
Remove one screw from fan motor assembly
first, push the connect plate of fan light
upwards until the fan motor assembly screws
insert into the key hole slot of connect plate
of fan light then rotate the connect plate of fan
light till it fixed on the motor bottom. Finally,
secure the connect plate of fan light to motor
bottom with previous screw which we removed
and tighten the other two fan motor assembly
screws.
Fan Light
Connect
Plate of
Fan Light
Fig.16
Fig.17
Connect
Plate Screws
Loading ...
Loading ...
Loading ...