Loading ...
Loading ...
Loading ...
(For ceiling mount only):
Remove the canopy cover from the
canopy.
Remove downrod stand cover and
three of six screws (every other one)
securing the motor collar to the top
of the fan motor housing. Attach the
canopy to the housing with three screws.
PAGE: 5 / 11
(
For downrod mount only):
191227
Hang the fan on hanger bracket, and make sure the slot of hanger ball is
snapped into the chip of hanger bracket exactly.
Note: For slope ceiling installation, make sure the slot of hanger ball
and the chip of hanger bracket face down.
(
For downrod mount only):
Tighten the two Collar Screws.
Slide Lock Pin into Hanger
Pin until it is locked into position.
(
For downrod mount only):
Slide canopy, canopy cover and
downrod stand cover onto downrod,
as shown; then thread motor wires
through downrod.
(
For downrod mount only):
Loosen the collar screws out part way.
Insert the Downrod into the Collar.
Slide Hanger Pin through holes of Collar
and Downrod.
Fig.5
Hanger Pin
Lock Pin
Slot
Hanger Bracket
Fig.9
Chip
Canopy
Housing
Fig.3.
Downrod
Canopy
Motor Wires
Downrod Stand
Canopy Cover
Cover
Fig.6
Downrod
Canopy
Motor Wires
Downrod Stand
Canopy Cover
Cover
Fig.7
Hang Pin
Fig.8
Lock Pin
Collar Screws
(
For ceiling mount only):
Raise the fan and place the canopy
on the hanger bracket hook for wiring.
Go to Fig.10 for the next steps.
(
For downrod mount only):
Remove the Lock Pin and take
off the Hanger Pin.
Fig.4.
Hanger Bracket
Hook
Installation Steps :
Tighten the hanger bracket to the outlet
box with 2 mounting screws. (To reduce
the risk of fire, electric shock, or personal
injury, mount to the outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For slope ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
Fig.1
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
Hanger
Bracket
Chip
Fig.2
Outlet Box
Loading ...
Loading ...
Loading ...