Loading ...
Loading ...
Loading ...
To Set the Warmer Drawer Controls:
The controU and indicator Hghts for the Warmer Drawer features are Uocated on the controU panek The temperatures are
approximate, and are designated by HI (high), MED (medium) and LO (Uow),
1, Touch the o_0f_ (see Fig, 4) pad at the Warmer Drawer controUposition, The Warmer Drawer indicator Hght wHUflash, Note:
Ufno further pads are touched within 25 seconds the request to power the Warmer Drawer ON will clear,
2, Set the desired power leveI, Touch /k once to turn ON the power level for Hl (see Fig, 1)or V to tum ON the power
level for LO (see Fig, 3). The Warmer Drawer indicator light located beside the _ pad will turn ON steady.
3. Each touch of the V or A padswilldecreaseorincreasethrough5powerlevelsfromHl(seeFig. 1)toMED(seeFig.
2) to LO (see Fig. 3). Note: For best results, preheat the Warmer Drawer before adding the food. An empty d rawer will preheat
in approximately 15 minutes,
4, When the food is ready for removal, touch the 0_/0_ pad once to turn the Warmer Drawer OFF,
The Warmer Drawer indicator light will turn OFF,
Note: The Warmer Drawer is inoperable during the self-clean cycle.
Note: The warmer drawer is equipped with
a latch which may require extra force when
opening and closing the drawer.
h_¢ hiO hiO
@ © ©
rned @ reed @ reed Q
@ @ ©
Jo @ Jo @ Jo O
Fig,1 Fig, 2 Fig, 3
i!ili !!ii¸
Fig, 4
17
Loading ...
Loading ...
Loading ...