Loading ...
Loading ...
Loading ...
Models with Ceramic @ass Cooktop (continued)
Operating the Warmer (Warm & Ready TM) Zone (Mode_ D):
The purpose of the Warmer Zone is to keep hot cooked foods at serving
temperature. Use the Warmer Zone to keep cooked foods hot such as:
vegetaNes, gravies, casserobs, soups, stews, breads, pastries and oven-
safe dinner @ates. AUwaysstart with hot food. it is not recommended to heat
coUdfood on the Warmer Zone.
AHfood @aced on the warmer zone shoed be covered with a Hd to maintain
quality. For best resets, when warming pastries or breads, the cover shoed
have an opening to allow moisture to escape, Do not use plastic wrap or
aluminum foit to cover food. Plastic or aluminum may melt onto the
surface.
Use onUy@ates, utensils and cookware recommended for oven and cooktop
use on the Warmer Zone,
Warmer Zone Temperature SeJection
Refer to the Warmer Zone table for recommended heating levels (Fig, 1 ), If a
partic@ar food is not listed, start with the medium level, and adjust as needed,
Most foods can be kept at sewing temperatures by using the medium level,
Warmer Zone Recommended Food
Settings Table
Food Item Heating Levet
Hot Beverages HI
Fried Foods HI
Vegetables MED
Soups (Cream) MED
Stews MED
Sauces MED
Meats MED
Gravies LO
Eggs LO
Dinner Plates with Food LO
Casseroles LO
Breads/Pasteries LO
Fig, 1
To Set the Warmer Zone Control:
Touch the pad at the Warmer Zone control position. The Warmer Zone
indicator light will flash. Note: Ifno further pads are touched within 25 seconds the
request to power the Warmer Zone ON will clear.
2. Atthe WarmerZone controb position touch :/, : once to turn ON the power bvel
for HI (see Fig. 2) or to turn ON the power level for LO (see Fig. 5). The
Warmer Zone Indicator light located above the ON/OFF pad will turn on steady and
the Hot Surface indicator light located on the cooktop will turn ON when the
Warmer Zone becomes hot.
3, Eachtouch _ :or k/ willincreaseordecreasethepowerlevels, TheWarmer
Zone has 5 power levels from HI (see Fig, 2) through MED (see Fig, 4) to LO (see
Fig, 5), The power level may be adjusted at any time while the Warmer Zone is
ON,
4 Whonthofeed,sroadytesorvo,teuchtho{!}ppadencotetumthoWarmorZeno
OFF, The Warmer Zone indicator light will turn OFF,
Note: The Hot Surface indicator light located on the cooktop wiii remain ON if the
cooktop is still hot and wiii remain ON until the heating surface area has cooled
sufficiently,
@ i4 .... .... hi
,_x_,,x, ,xS,%',,.
iiiiiiii_iiiiiii:i_ ....................
@
O:O" 0
Zoe
,_%( R_ic a d
0/ยข P
Zoe R_;c b _:
:}@o o@d
{} @ Q @
Fig. 2 Fig. 3
0 T%_d Ft%!od
@
@ o @ o
Fig, 4 Fig, 5
Radiant surface elements may appear to have cooled after they have been turned off, The glass surface may
stitt be hot and burns may occur if the @ass surface is touched before it has cooled sufficiently,
Do not pJace aluminum foit or pJastic items such as saJt and pepper shakers, spoon hotders or pJastic
wrappings on top of the range when it is in use. These items could melt or ignite, Potholders, towels or wooden spoons could
catch fire if placed too close to the surface elements or burners,
The Warmer Zone will not glow red when it is hot, but becomes hot enough to cause burns, Avoid @acing hands
on or near the Warmer Zone until the Warmer Zone Hot Surface indicator light is OFF, Always use potholders or oven mitts when
removing food from the warmer zone as cookware and plates will be hot,
13
Loading ...
Loading ...
Loading ...