Loading ...
Loading ...
Loading ...
Page 11
Operating
Instructions
4. EC0 Button
Press the ECO button to initiate the Energy
Saver function. This function is available
on COOL, DRY, and AUTO (only AUTO-
COOLING and AUTO-FAN) modes. The fan
will continue to run for 3 minutes after the
compressor shuts off.
The fan then cycles on for 2 minutes
at 10 minute intervals until the room
temperature is above the set temperature,
at which time the compressor turns back
on and Cooling Starts.
5. MODE Button
• To choose the operating mode, press
the MODE button. Each time you press
the button, a mode is selected in a
sequence that goes from Auto, Cool,
Dry and Fan. The indicator light beside
the button will be illuminated and
remain on once that mode is selected.
• When the unit is turned off and back
on via the power button, the unit will
automatically switch on the Energy
Saver Function for the following modes:
Cool, Dry, Auto.
To operate on AUTO feature:
• When you set the air conditioner to
AUTO mode, it will automatically select
cooling or fan only operation, depending
on what temperature you have selected
and the current room temperature.
• The air conditioner will automatically
control the room temperature according
to the temperature you’ve set.
• In this mode, the fan speed cannot be
adjusted and is automatically controlled
based on the temperature setting and
room temperature.
To operate on COOL mode:
• Choose Cool Mode to set the cooling
function. Use the UP (
) or DOWN
(
) buttons to choose the desired
temperature. When Cool Mode is
selected, the fan speed can be adjusted
by pressing the FAN button.
To operate on DRY mode:
• In this mode, the air conditioner will
generally operate as a dehumidifier.
Since the conditioned space is a closed
or sealed area, some degree of cooling
will continue. On Dry mode, the fan
speed is not adjustable.
To operate on FAN mode:
• Use this function only when cooling
is not desired, such as for room air
circulation. You can choose any fan
speed you prefer.
• In Fan Only mode, the temperature can
not be adjusted and the display will show
the actual room temperature, not the set
temperature as in the cooling mode.
6. UP/DOWN Button
Press UP (
) or DOWN ( ) button to
change temperature setting.
7. FAN SPEED Button
Press FAN button to select the Fan Speed
in four steps - Auto, Low, Med or High.
Each time the button is pressed, the fan
speed mode is shifted.
8. SLEEP Button
Press SLEEP button to initiate the
sleep mode. In this mode the selected
temperature will increase (in cooling
mode) by 1°C (2°F) 30 minutes after
the mode is selected. The temperature
will then increase (in cooling mode) by
another 1°C (2°F) after an additional 30
minutes.
This new temperature will be maintained
for 7 hours before it returns to the
originally selected temperature.
This ends the Sleep mode and the unit
will continue to operate as originally
programmed. The Sleep mode program
can be cancelled at any time during
operation by pressing the SLEEP button
again.
Loading ...
Loading ...
Loading ...