Cadet CB132T Com-Pak Multi-Watt Bathroom Heater w/ Thermostat

User Manual - Page 2

For CB132T.

PDF File Manual, 8 pages, Read Online | Download pdf file

CB132T photo
Loading ...
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
1. Read all instructions before in-
stalling or using this heater.
2. This heater is hot when in use. To
avoid burns, do not let bare skin
touch hot surfaces. Keep com-
bustible materials, such as fur-
niture, pillows, bedding, papers,
clothes, etc. and curtains at least
3 feet (0.9 meters) from the front
of the heater and keep them away
from the sides.
3. Extreme caution is necessary
when any heater is used by or near
children or invalids and whenever
the heater is left operating and
unattended.
4. Do not operate any heater after it
malfunctions. Disconnect power
at service panel and have heater
inspected by a reputable electri-
cian before reusing.
5. Do not use outdoors.
6. To disconnect heater, turn con-
󰀨󰀨
heater circuit at main disconnect
panel.
7. Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may

damage the heater.
8. 
block air intakes or exhaust in any
manner.
9. A heater has hot and arcing or
sparking parts inside. Do not use
it in areas where gasoline, paint,

used or stored.
10. Use this heater only as described
in this manual. Any other use not
recommended by the manufactur-

or injury to persons.
11. This heater must be installed in

When using electrical appliances, basic precautions should always be

the following:
KNOW YOUR VOLTAGE!
120 volt
single-pole breaker
240 volt
double-pole breaker
The multi-volt CB103T is factory set to 240 volts out of the box. It can be easily
changed to 120 volts. Please don’t assume you have 120 volts because your
wires are black and white.
The multi-watt CB132T can only be connected to 240 or 208 volts and its
wattage is adjustable.
If you are uncomfortable working with electricity, running electrical supply wire or
installing a circuit breaker, please consult a licensed electrician. Make sure power
󰀨
on a heater. Serious injury or electrocution can result from electric shock.
CHECK YOUR BREAKER! If you’re replacing an existing heater, check the labels
of the old heater and use the same voltage.

toll free at 855.223.3887 or from Canada 800.668.6663.
2
WARNING: Connecting a heater to a voltage higher than what’s listed on its rating

when connected to a voltage lower than what’s listed on its rating label.
Loading ...
Loading ...
Loading ...