Glass Shade
Socket
Installation Steps:
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
Pan
1.Thread 2 screws into the mounting strap.
2.Attach the mounting strap to the ceiling box
by using 2 mounting screws.
3.Make wire connections with wire nuts:
---Connect the black wire from fixture to the
black wire from power source.
---Connect the white wire from fixture to the
white wire from power source.
---Attach the grounding wire and the house
grounding wire to the mounting strap with
a green grounding screw.
Carefully tuck wires back into the ceiling box.
4.Attach the pan to the mounting strap by inserting
the 2 screws and rotate until fixture locks in
place, and secure the screws tightly.
5.Thread the nipple into the coupling, and secure with
the hex nut.
6.Install bulbs. (Please do not exceed the maximum
capacity, which is recommended on the package.)
7.Attach the glass shade, rubber pad, cap and metal frame
onto the nipple in order, and secure with the finial.
8.Turn on the power at fuse or circuit box.
Mounting Screw
Screw
House Grounding Wire
Mounting Strap
Grounding Screw
Fixture Wire
Wire Nut
Ceiling Box
Grounding Wire
Coupling
Hex Nut
Rubber Pad
Cap
Metal Frame
Finial
Nipple
OF25515
