Loading ...
Loading ...
Loading ...
INTELLIGENT TEMPERATURE CONTROLLER OPERATION METHOD
Ⅱ.Set temperature required
Ⅰ.Preparation before Using:
Check the connection between power plug and electrical socket of electrical cabinet.Be sure to
operate with safe ground wire!!!
Heat press element must be securely plugged into the machine before you switch the machine
on.Plug your electrical cord into the machine. Plug electrical socket into wall plug.Turn the power
on by ipping the On/O Switch on.( Nominal voltage:220V, Max.input power:1250W )
Set the temperature and time according to the table below and get the specic corresponding
temperature and timing setting.(Temperature is measured in Degrees Fahrenheit.)
Press the “MODE”button ONCE,see the “set light” turning red.Then press
the “plus/minus key” to set the initial heating temperature.
1.
2.
A.Initial Temperature Setting ( Range:200-450℉)
Press the “MODE” button for THE SECOND TIME;see the “temperature light” turning
red.Then press the “plus or minus key” to set the highest heating temperature.
B.Highest Temperature Setting ( Range:200-450℉)
Press the “MODE” button for THE THIRD TIME;see the”time light” turning red.
Then press the “plus or minus key” to set the proper heating time.
C.Proper Heating Time Setting ( Range:0-999 sec.)
Press
Object
Mugs
Tiles
Metal board
Plate
230
230
230
230
330
330
300
355
40
40
40
150
Initial
Temperature
Highest
Temperature
Proper Heating
Time ( s )
Sublimation paper:30-50s
T-shi Paper:10-20s
T-shi
230 355
06 07
Turn o the power and pull out the mat. It is recommended to wear heat-resistant gloves
when removing clothes or remove them after 2-3 minutes. Be careful of hot heat.
Printed pattern
Note
• The machine has a self -locking function for temperature setting.
---If the staing temperature is set to 340°F,the machine will automatically limit the
maximum temperature setting range from 340 to 430°F.
---Conversely,if setting the maximum temperature as 250°F at rst,the machine will
automatically limit the staing temperature setting range from 200 to 250°F.
• Initial heating temperature always=<Highest heating temperature
Printed clothes
Press the “MODE”button for THE FOURTH TIME;nish the setting , The set light is on,
and the temperature will continue to rise. When the set maximum temperature is reached, the
countdown stas. After the countdown ends, the "BEEF" sound will be emitted, the indicator
light will turn o, and the operation is complete.and the machine stands by to work.
D.Finish the Setting and Stands by to Work
Loading ...
Loading ...
Loading ...