Loading ...
Loading ...
Loading ...
13
2
1
Select the appropriate size
baking coaster ( Pa F or G ).
Put the cup in Pa E.
Install H to Pa E.
(Tighten the screws on both sides. We suggest
to tighten the screws on the side ① rst, and
then tighten the screws on the side ② )
Adjust the tightness.
Plug in.
Shaped cup
Replace Baking Coaster
E
H
F or G
E
①
②
CAUTION
• CHECK the correct voltage before using the machine.Be SURE to operate with reliable grounded
protection connections.
• TURN OFF the machine,and then DISCONNECT the power-supply before
replacing the heat units.DO NOT forget to wearing insulated gloves if the unit
is still under high-temperature.
• AVOID prolonged burning of the heating pas.If not turning the power o,
please place a hot stamping replacement ( it could be a scrap and can be used
repeatedly ).AVOID damaging the heating units with sharp pas of the stamping object.
• AVOID touching the heating units and the compression spring without
protection in case of potential damage,of body during use.
• If it’s hard to pushing the grasp,please adjust the rotation lock screw in order
to reduce the pressure of compression spring.Or, it will damage to the
strength of the machine.
• Before lifting the machine,please lock the machine head by rotation lock screw
and loosen the handle(don’t screw the rotation lock screw too tight).Besides,
do not put down the machine beyond the limit.When meeting the falling limit,
you can feel an obvious pressure on the swiveling pressure adjustment wheel.
• Keep children away from the machine!!!
• DO NOT attempt to press products that are not intended for normal heat transfer. Baking pads
should be avoided of empty burning.
16
Loading ...
Loading ...
Loading ...