Loading ...
Loading ...
Loading ...
04
BLUETTI
2.1.1. Personal Safety
●
During the operation of the equipment, if a malfunction that may cause personal
injury or equipment damage is found, it should be terminated immediately.
● Please do not power on the device if the device has not been installed or
conrmed by relevant experts.
2.1.2. Personnel Requirements
●
The personnel responsible for the installation and maintenance of the
equipment must rst undergo rigorous training to understand various safety
precautions and grasp the correct method of operation.
● Trained personnel: personnel who have undergone corresponding technical
training and have the necessary experience to be aware of the danger that
may be brought to him during the operation, and can take measures to
reduce the danger to himself or other personnel to at the lowest limit.
● The replacement of equipment or parts (including software) must be done by
professionals or authorized personnel.
2.1.3. Anti-static requirements
When installing the sub-panel with your main panel, you must wear anti-static
gloves or an anti-static wrist strap before touching the device. The other end of
the anti-static wrist strap should be properly grounded. Do not touch any bare
components directly with your hands.
2.1.4. Drilling
The following safety precautions are to be considered when drilling holes on the
wall or into the ground:
●
It is strictly forbidden to drill holes into the equipment. Drilling will alter and
damage the electromagnetic shielding performance of the equipment, internal
components, and cables. The risk of metal shavings entering the device can
cause short circuits on the circuit board.
● Wear goggles and protective gloves when drilling holes.
● The equipment should be shielded and protected during the drilling process
to prevent debris from falling into the equipment. After drilling, any and all
debris which may have landed on the equipment should be removed and
cleaned in a timely manner.
Loading ...
Loading ...
Loading ...