Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
DATES '
AS YOU COMPLETE
REGULAR SERVICE d_'_b£'_._ £.__';/_ .."/_q._/" _q_(';'/_£'_" SERVICE DATES
Check Brake Operation _,
Check Tire Pressure
Check Operator Presence and
T interlock Systems I1_
R Check for Loose Fasteners _ _7
A Sharpen/Replace Mower Blades I_.
C Lubdcation Chart
0 Check Battery Level
R Clean Battery and Terminals
Check TransaxIe Cooling
Adjust Blade Beit(s) Tension _5
Adjust Motion Drive Belt(s) Tension _5
Check Engine Oil Level _ I_
Change Engine Oil 1_123
Clean Air Filter
N Clean Air Screen
G Inspect Muffler/Spark Arrester V'
Replace Oil Filter (If equipped) _:
N Clean Engine Cooling Fins 11_2
Replace Spark Plug _
Replace Air Filter Paper Cartridge _2
Replace Fuel Filter
1 - Change more often when operating under a heavy load or in high ambient temperatures 5 - If equipped with adjustable system
2 - Service more often when operating in dirty or dusty conditions 6 Not required if equipped with maintenance free battery
3 gequippedwithoilfilter, changeoilevery50hours 7 Tightenfrontaxlepivotboltto35ff Ibs maximum
4 Replace blades more often when mowing in sandy soil Do not overtighten
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
LUBRICATION CHART
(])TIE ROD BALL JOINTS
ZERK ZERK
_FRONT WHEEL,
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean or
replace air filter, and check blades and belts for wear. A
newspark plug and clean airfilterassure proper air-fuel
mixture and help yourengine run betterand last longer.
WHEEL
BEARING
ZERK
SECTOR "_)ENGINE
GEAR TEETH
BEFORE EACH USE
Check engine oil level.
Check brake operation.
Check tire pressure.
Check operator presence and
interlock systems for proper operation.
Check for loose fasteners.
16
(])SPRAY SILICONE LUBRICANT (MOVE BOOTS TO LUBRI-
CATE)
_GENERAL PURPOSE GREASE
_)REFER TO CUSTOMER RESPONSIBILITIES "ENGINE"
SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT
POINTS WHICH HAVE SPECIAL NYLON BEARINGS.
VISCOUS LUBRICANTS Wl LL ATTRACT DUST AND DIRT
THAT WILL SHORTEN THE LIFE OF THE SELF-
LUBRICATING BEARINGS, IFYOU FEELTHEY MUST BE
LUBRICATED, USE ONLYA DRY, POWDERED GRAPHITE
TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...