Loading ...
Loading ...
Loading ...
14, Assemble the two remaining hopper mounting
clamps to the outside of bag frame ,with 5/16"
x 3/4" hex bolts and 5/16" hex lock nuts. See
figure 22_ Tighten securely.
MOUNTING CLAMP
5/16" x 3/4"
HEX BOLTS
51t6" HEX LOCK NuTs
FIGURE 22
15. Secure the rope to the top center of hopper
bag frame as shown in figure 23_
16.
Assemble the wind screen over the top of
hopper bag frame by simply hooking the top
corner loops and pull the bottom loops down
over the ends of the pivot rod, See figure 24°
WIND SCREEN
TOP CORNER LOOP
FIGURE 24
OF PIVOT
ROD
17,
To assemble the hopper bag frame to the
sweeper, simply hook the pivot rod into the
notches in mounting arms. Bag retainers must
pivot freely to lock in position,. See figure 25,.
18. To remove the hopper bag frame from the
sweeper, simply lift up on the bag retainers and
lift off hopper bag. See figure 25
HOPPER BAG FRAME
BAG RETAINER
-" PIVOT ROD
I
HOPPER MOUNT ARM
FIGURE 23
FIGURE 25
9
Loading ...
Loading ...
Loading ...