Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
FOR HOPPER BAG
Refer to carton contents figure on page 2 and figure
2 on page 3 for hardware needed to assemble
hopper bag. See page 2 to identify both upper and
lower hopper tubes°
1. Insert the left hand upper hopper tube through
the hopper bag stitched flaps, starting at the
center cut out in the top of the hopper bag, See
figures 10, 1t and 12. Repeat for the right hand
upper hopper tube.
UPPER HOPPER TUBE
(LEFT HAND SHOWN)
BAG FLAP
CENTER CUT OUT
START
3_ Secure the. upper tubes with 1/4" x 1"
curved head bolt and hex lock nut. See figure
12,
114" HEX LOCK NUT
(INSIDE)
-,,,,o
114" x 1" CURVED HEAD BOLT
(OUTSIDE)
/
FIGURE 12
FIGURE 10
2_ Stide the two upper hopper tubes together, as
shown in figure 11, Line up the center holes.
UPPER HOPPER TUBES
FIGURE 11
. Assemb)e the two lower hopper tubes as
shown in figure t3, Secure with 1/4" x 1"
curved head bolt and 1/4" hex lock nut, See
figure 13,
1/4" x 1"
CURVED HEAD BOLT
LowER
HOPPER
TUBES
/
1t4" HEX LOCK NUT
FIGURE 13
Loading ...
Loading ...
Loading ...