Wet Sounds HTX-2 User Manual

Loading ...

When connecting two speakers in bridged mode on channels 1-4 on the HTX-

4 or HTX-6, the left and right RCA’s must be split to retain stereo separation.

This means you will have left audio out of the left speaker and right audio out

of the right speaker. You must also switch to 4CH on the input mode section

of the control panel on top of the amplier (See the switch image below for an

example). If you choose not to congure using this method and just use 2CH

mode, then both speakers will play in mono and not stereo.

Two dual male RCA Y-Splitters are

required for this conguration.

Please contact Wet Sounds Technical Support at 877.938.7757 if you need

any assistance or how to bridge your HTX Series Amplier.

HTX-6 Control Panel

Wet Sounds HTX Series Owner’s Manual

BRIDGED AUDIO RCA CONFIGURATION

HTX-4 Connection Panel

Loading ...

Wet Sounds HTX-2 HTX2 Class D Subwoofer Amplifier HTX2