Loading ...
Loading ...
Loading ...
€
,E
How to Install the Wheels
If the wheels must be removedfor service, make sure they
are installed as follows.
Front Wheel:
1. Make sure thevalve stem is to the outside of the
tractor. Slide the frontwheel on the spindle(See
Figure44).
2. Fastenthe frontwheel with washer and cotterpin.
Bendthe endsof the cotterpinapart to keepthefront
wheel on the spindle.
3. If your model has hubcaps, installthe hubcaps. Make
sure the washershold the hubcapsin place.
Figure44. Front wheelassembly
A - Cotterpin
B - Hub cap
C - Valvestem
D - Front wheel
E- Spindle
F- Washers
RearWheel:
1. Install the washers and spacer onto the axle asshown
in Figure45.
2. Mount the square key in the key slot (See Figure45).
3. Make sure thevalve stem is to the outside of the
tractor. Align the slot in the rear wheel with the square
key. Slide the rear wheel on the axle.
4. Fastenthe rear wheel with washerand e-ring.
5. If your model has hubcaps, install the hubcaps. Make
sure the washershold the hubcapsin place.
Figure45: Rearwheelassembly
A - Rearwheel
B - Hubcap
C- E-ring
D- Washer
E - Valvestem
F- Spacer
G- Washer
H- Square key
I - Keyslot
J - Axle
Howto Replacethe Fuse
If the fuse is blown, the engine will not start. The location of
the fuse is behind the panel betweenthe engine and the
control console. Removethe fuse and replacewith an
automotive fuse of equivalent rating (Figure46).
Figure46: Fuselocation
A - Automotive fuse
38
English
www.snapper.com
Loading ...
Loading ...
Loading ...