Loading ...
Loading ...
Loading ...
3. Some models havegauge wheels on the mower deck. If
equipped, removethe gauge wheels.
4. Move the decklift lever to the LEVELADJUSTMENT
position (Figure39).
,_ WARNING:The decklift lever isspringloaded.Makesure the lift lever is lockedinthe LEVEL
ADJUSTMENTposition.
5. Loosenthe left and right adjuster knobs(Figure40).
Pushdown on eachside of the mowerdeck. Makesure
both sides of the mower deck are setting on a flat
surface. Also, make surethe lift links are loose and can
easily move up or down.
6. Pushdown on the lift links and tighten the left and
right adjusterknobs(Figure40). Make sure the
adjusterknobsaretight. If necessary,usea wrench to
tighten the adjusterknobs.For plastic adjusterknobs,
tighten to a torque of 7 foot pounds (9,5 Nm). For
metal adjusterknobs,tighten to a torque of 10 foot
pounds (13,5 Nm).
7. Raisethe deck lift leverfrom the LEVELADJUSTMENT
position to a CUTTINGHEIGHTposition (Figure41).
8. If equipped, install the gaugewheels.
9. Mow for a short distance. If the height of cut is not
level, repeatthe abovesteps.
CAUTION:Do notoperatewith the mowerdeckin the
LEVELADJUSTMENTposition.If youoperatein the LEVEL
ADJUSTMENTposition,the mowerdeckand bladescanbe
damaged.
Figure39: Leveradjustment
A - Decklift lever
B - LEVELADJUSTMENTpositon
C - CUTTINGHEIGHTpositions
Figure40: Looseningadjuster knobs
A - Lift rink
B - Adjuster knobs
Figure41: Cutting position
A - Deckrift lever
B - CUTTINGHEIGHTpositions
Replacingthe MotionDriveBelt
Themotion drive belt is designedfor extremely long life, and
with proper care and maintenance,it should last for the life
of the unit. However,in the unlikely eventthat the motion
drive belt should require replacement,it should be
performed only by an authorizeddealer.
,-,z
English
33
Loading ...
Loading ...
Loading ...