Loading ...
Loading ...
Loading ...
Begin procedure
1. Open the washer door and remove any clothing or items from the washer.
2. Using the AEERESHTM washer cleaner (Recommended):
Add one AFFRESHrMwasher cleaner tablet to the washer drum.
3.
4.
If using liquid chlorine bleach:
Open the dispenser drawer and immediately add 2/3cup (160 ml.) of liquid chlorine
bleach to the bleach compartment.
NOTE: Do not add any detergent to this cycle. Use of more than 2/3cup (160 ml.) of
bleach will cause product damage over time.
Close the washer door and the dispenser drawer.
To start the Clean Washer cycle, first enter "Start Operating Setup." Then press and hold
DEI_ICATES & KNITS for 1 second. With the entire display flashing, press BRIGHTS.
NOTE: The basket will rotate, then the door will unlock, lock again, and then the cycle
will continue.
• The machine will not fill, but the basket will rotate while the washer runs a short
sensing cycle. This will take approximately 3 minutes.
5. The cycle will determine whether clothing or other items are in the washer.
a) If no items are detected in the washeb it will proceed to Step 7.
b) If any items are detected in the washer, "rl." or "F-34" will be displayed. Then the
door will unlock.
• Press DEI_ICATES & KNITS to cancel the failure code. Then repeat steps 1,3
and 4 to start the cycle again.
6. Once the cycle has begun, allow the cycle to complete.
7. After the cycle is complete, leave the door open slightly, to allow for better ventilation and
drying of washer interior.
Always do the following to maintain washer freshness
• Use only HE High Efficiency detergent.
• I.eave the door slightly open after each cycle to allow for better ventilation and drying of
washer interior.
Clean the washer monthly using the Washer Maintenance Procedure, an AFFRESH rM
tablet or2/a cup (160 ml.) of liquid chlorine bleach.
If the procedure does not sufficiently improve the machine freshness, please evaluate your
installation and usage conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your
washer to keep it looking new. Use mild soap and water. Do not use abrasive products.
Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.
1. Unlock the dispenser drawer by pressing the Release I.ever. Remove the drawer.
2. Remove the inserts (the siphon from the softener and bleach compartments).
3. Wash the parts under running water.
NOTE: Do not wash components in the dishwasher.
4. Replace the inserts and return the dispenser to the drawer.
Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect
and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, record the date of replacement.
If you need assistance:
The Maytag Consumer Interaction Center will answer any questions about operating or
maintaining your washer not covered in the Installation Instructions. The Maytag Consumer
Interaction Center is open 24 hours a day, 7 days a week. Just dial 1-800 NO BELTS
(1-800-662-3587) - the ca[[ is free.
When you ca[[, you will need the washer mode[ number and serial number. Both numbers
can be found on the serial-rating plate located on your appliance.
Enhance your washer with these premium accessories.
For more high-quality items or to order, ca[[ 1-800-901-2042, or visit us at www.maytag.com/
accessories. In Canada ca[[: 1-800-807-6777 or visit us at www.whirlpoolparts.ca.
Part Number Accessor
8212638RP 6 ft (1.8 m) nylon braided space-saving fill hose, 90 ° elbow, hypro-
blue steel couplings. Safer than stainless steel (2-pack)
8212487RP 5 ft (1.5 m) nylon braided fill hose. Safer than stainless steel (2-pack)
8212526 Washer drip tray, fits under all
31682 All purpose appliance cleaner
1903WH I.aundry supply storage cart
W10135699 AFFRESH _'_*washer cleaner
18 ....
Loading ...
Loading ...
Loading ...