Loading ...
Loading ...
Loading ...
Levelling the machine
The dryer does not require a base. However, make
sure that any uneven areas of the floor are made le
-
vel.
The dryer must be perfectly level to ensure that it
functions correctly.
The screw feet A can be adjusted to align it.
After aligning correctly you will need to use a screw
-
driver to secure discs B to the floor plate.
Installation on a raised plinth
The dryer can be installed on a raised concrete
plinth.
,
If the machine is installed on an on-site base, it
must be secured using the fixing brackets sup-
plied. Otherwise there is the danger of the machi
-
ne moving and falling off the base.
^
Secure the front feet of the dryer with the clamps
supplied.
Reducing the noise level
The dryer is fitted with an exhaust fan which can be
heard during operation.
If this noise disturbs you it is possible to fit a silencer
(available from Miele as an optional accessory) into
the dryer's exhaust duct (see "Installation instructi
-
ons).
Coin mechanism
The dryer can be fitted with a coin mechanism.*
A suitable adapter* is required for this. The machine
has to be reprogrammed by a Miele service technici
-
an.
Empty the coin box every day. This prevents too
many coins or tokens collecting in the coin box,
which could lead to the machine breaking down.
* available from the Miele Spare Parts Department.
Communication module XKM RS232
The dryer can fitted with a communication module
which enables it to be linked to a PC via a serial inter
-
face.
The slot for the communication module is located on
the rear of the machine.
An editor program is available from Miele.
29
Installation and connection
Loading ...
Loading ...
Loading ...