Loading ...
Loading ...
Loading ...
Explanation of the Warning and Safety
symbols on the machine
It is essential to read these operating
instructions.
Please refer to specific instructions, e.g.
Installation instructions
Caution, hot surfaces.
Caution, voltage up to 1000 volts.
Earthing
To avoid the risk of accidents and damage to the
machine read the operating instructions carefully
before using it for the first time. They contain im-
portant information about the installation, safety,
use and maintenance of the machine. Keep them
in a safe place and ensure that new users are fa-
miliar with the content. Pass them on to any future
owner of the machine.
Correct application
~
This dryer must only be used for drying articles
which were washed in water and which have a care
label stating that the article is suitable for machine
drying.
~
To prevent the risk of fire, the following must
not be dried in this tumble dryer (with the exception
of those fabrics which can be dried in the Special
Programs specifically designed for them):
fabrics which contain a large proportion of rubber,
foam rubber or rubber-like materials.
items which have been treated with inflammable
cleaning agents.
items which have been splashed with hair lacquer,
hair spray, nail varnish remover or similar substan
-
ces.
items which have been soiled with oils or residues
containing grease (kitchen oils, cosmetics etc.).
items soiled with wax or other chemicals (e.g.
mops and floor cloths).
items with damaged padding or fillings (e.g. pil
-
lows, jackets).
items soiled with grease or oil which have not been
properly cleaned beforehand. Use heavy-duty de
-
tergents where necessary to clean heavily soiled
garments, e.g. workwear. If necessary consult the
detergent manufacturer for advice.
With sensitive fabrics there may be a danger of them
self igniting if dried for too long. They should be re
-
moved as soon as the program has finished or if the
-
re is a power cut.
Keep a fire extinguisher near the machine at all times.
~
Do not unload laundry from the drum until the
cooling down phase has been completed.
Hot laundry can self ignite and cause a fire when fol
-
ded or put away.
~
Check that all pockets of workwear etc are empty
to avoid the danger of inflammable objects, e.g. ciga
-
rette lighters, matches, candles or cosmetics being
placed in the dryer.
~
If the dryer is installed in a public area the owner
must ensure that it can be operated safely.
~
This dryer must not be used outside.
Technical and electrical safety
~
This machine must only be installed and commis-
sioned by a Miele technician.
~
The electrical safety of this machine can only be
guaranteed if connected to a correctly installed ear-
thing system on site. It is most important that this ba-
sic safety requirement is present and tested regularly,
and where there is any doubt, the on-site electrical
wiring should be inspected by a qualified electrician.
The manufacturer cannot be held liable for the conse-
quences of an inadequate earthing system (e.g. elec-
tric shock).
~
The machine is only completely isolated from the
electricity supply either when it is switched off at the
isolator switch or the mains fuse has been withdrawn.
~
Repairs to electrical heated appliances should
only be carried out by a suitably qualified and com
-
petent person in accordance with local and national
safety regulations. Repairs and other work by unqua
-
lified persons could be dangerous. The manufacturer
cannot be held liable for unauthorised work.
~
Faulty components must only be replaced by ge
-
nuine Miele original spare parts. Only when these
parts are fitted can the safety standards of the machi
-
ne be guaranteed.
~
This machine must not be operated in the same
room as dry cleaning machines which use solvents
containing chlorofluorocarbons (CFCs). Escaping va
-
pours break down during combustion into hydrochlo
-
ric acid which can have a detrimental effect on both
the laundry and the machine. Even when such machi
-
nes are installed in separate rooms, care should be
taken to ensure that no exchange of air can take pla
-
ce.
Warning and Safety instructions
4
Loading ...
Loading ...
Loading ...