Loading ...
Loading ...
Loading ...
Corner Brackets
Shelf
_" Right Side
Shelf Stiffener
Panel
Fig_ 20
Rear Flange
18, Put truss head bolts through the three
holes along the bottom edge of the right side
panel Put a lockwasher and hex nut on each
bolt and tighten using a 7/16 inch wrench or
socket. (Figure 20)
Note: It is sometimes difficult to get bolts
through these three holes. You may need to
use a Phillips screwdriver to help shift the
parts into place.
19. Repeat steps 17-18 with the left side
panel and the left side of the shelf.
20. Turn the cabinet right side up. Attach the
skirts to the top of the side panels, with one
on the front of the cabinet and the other on
the back. (Figure 21)
Skirt
Side Panel
21, Use eight truss head bolts, lockwashers,
and hex nuts to hold the skirts in place. Hand-
tighten. (Figure 21)
22, Put a truss head bolt through the hole at
the back, right corner of the shelf, This hole
goes through the shelf and the right side
panel. (Figure22)
Rear
I Right Side Panel
I
I
Shelf
Front
Fig, 22
23. Put a lockwasher and hex nut on the bolt
and tighten using a 7/16 inch wrench or
socket.
24° Repeat steps 22-23 on the left side of the
shelf,
25. Put a truss head bolt through the back of
the right spacer and front edge of the shelf.
(Figure 23)
Left Side
Panel
Fig. 21
Shelf
\
\
\
Skirt
13
I
I
I
t
I
.... 2
Side Panel
Fig. 23
©
Shelf
Spacer !
Loading ...
Loading ...
Loading ...