Loading ...
Loading ...
Loading ...
©2020 ACP, Inc.
Cedar Rapids, IA 52404
Page 15 of 24
Part No. 20267401
Revised 9/2020
STYLES 2 & 3 Control Panel and Features
STYLE 2
(C)
(G)
(A) (B) (D) (E) (F)
Control Panel Features
(A) DISPLAY (select models)
Some items in display can be seen but will not glow.
(B) TIME ENTRY KEYPAD
Use to enter cooking time for either manual entry or
programming.
(C) NUMBER KEYPADS
Use to begin cooking programs or enter times and power levels
for “Manual Time Entry” cooking
(D) POWER LEVEL KEYPAD
Use to set microwave power level between 0% to 100% in 10%
increments (1 = 10% power, 2=20%, 3=30%, etc.). The power
level can be decreased for foods that require slower more even
cooking. If cooking time is set and START keypad pressed, oven
cooks at 100% power. When programming, to reset power level
to 100%, press POWER LEVEL keypad.
(E) START KEYPAD
Begins Manual Time Entry cooking or restarts an interrupted
cooking cycle. When programming, use to save time and
power level, and to advance to next user option.
(F) STOP/ RESET KEYPAD
Use to exit programming mode and stop cooking during
cooking cycle.
(G) QUANTITY X2 KEYPAD
Increases a preset cook time by a percentage of the original
cook time, also know as a cook factor. Used for cooking
multiple servings of foods.
STYLE 3
(C)
(G)
(A) (B) (D) (E) (F)
Programming Features
STAGE COOKING
Allows operator to use up to four dierent cooking cycles
or stages consecutively without repeated input from the
operator. For example, stage cooking could be set to
defrost food initially, then cook it, and then keep the food
warm until serving time.
USER OPTIONS
Allows the user to customize various oven settings. See
“User Options” section of manual for details.
MANUAL TIME ENTRY
Allows operator to heat without changing the preset
program keypads.
PRESET PROGRAM KEYPADS
(
DIGIT ENTRY
)
The oven can of store either 10 or 100 cooking programs in
memory.
A. Single Digit Keypad Cooking
From the factory, the oven is programmed to store 10
cooking programs. Each keypad begins a cooking program.
B. Double Digit Keypad Cooking
The oven control can be changed to store up to 100
cooking programs. Each entry will be assigned a double
digit number, for example 01, 05, or 20. When using the
double keypad programming, two keypads must be pressed
to start the cooking cycle. To set the control to 100 cooking
programs, see the “User Options” section of this manual.
Loading ...
Loading ...
Loading ...