Loading ...
Loading ...
Loading ...
©2020 ACP, Inc.
Cedar Rapids, IA 52404
Page 13 of 24
Part No. 20267401
Revised 9/2020
STYLES 1 & 4 USB Flash Drive
Export Menu via USB Flash Drive
Note: Before beginning, “PIN Code” must be enabled in User Options
From READY or DOOR OPEN screen:
1. Insert ash drive into the USB port
2. Press and hold keypad number “4”/ USER OPTIONS
• PIN Code prompt appears
3. Press keypads 1-3-5-7-9 to enter SERVICE MODE
4. Press corresponding number keypad to select “Export to USB”
• EXPORTING… screen appears. Oven beeps once export is complete
• Settings, menu items, and oven usage data will be loaded on USB Flash Drive
5. Press STOP/RESET keypad to exit SERVICE MODE. Remove USB Flash Drive
Import Menu via USB Flash Drive
Note: Menu le must be .xml format; must be the only .xml le on the ash drive. Menu le
must be saved at the top level (root directory) of the ash drive, and cannot be located inside
any folders.
From READY or DOOR OPEN screen:
1. Insert ash drive into the USB port
2. Press and hold keypad number “4”/ USER OPTIONS
• If prompted, enter the PIN Code and press START/OK keypad
3. Press START/OK keypad to scroll through pages of user options until “Load File”
appears
4. Press corresponding number keypad to select “Load File”
Caution: Uploading a new le will overwrite existing items on oven. To ensure items are
not lost, rst backup les by exporting to USB drive.
• IMPORTING… screen appears.
• IMPORT COMPLETE screen displays once import is complete
• Settings and menu items will now be loaded on oven and ready to use
5. Press STOP/RESET keypad to exit USER OPTIONS. Remove USB Flash Drive
ACP Programming Application
For larger, and more complex menus, it may be more manageable to
create and edit menus using the ACP Programming Application.
For detailed instructions, please visit:
www.acpsolutions.com/oven-programming/
Open Menu in ACP Programming Application
Note: For more details, please see ACP Programming Application User Guide online
1. Insert ash drive into USB port on computer.
2. Open ACP Programming Application.
3. Select “File,” then “Open.” Navigate to ash drive. Select the menu le (.xml
format) and open
ENABLE/DISABLE PIN CODE
From READY or DOOR OPEN screen:
1. Press and hold keypad number “4”/
USER OPTIONS
• If prompted, enter the PIN Code
and press START/OK keypad
2. Press START/OK keypad to scroll
through pages of user options until
“PIN Code” appears.
3. Press corresponding number
keypad to open “PIN Code” options
4. To change the setting, press
corresponding number keypad
5. Press STOP/RESET keypad to exit
User Options Menu
Updating Firmware
Note: Firmware les must be
loaded on USB ash drive. Must be
saved at the root directory of the
ash drive, and cannot be located
inside any folders.
1. From READY screen, Press and
hold keypad number “7”.
• PIN Code prompt appears
2. Press keypads 1-3-5-7-9 to enter
SERVICE MODE
3. Press and hold keypad number “7”.
• Firmware update screen appears
4. Insert ash drive into the USB port
5. Press press START/OK keypad to
begin update
Troubleshooting:
If rmware fails to load: press and
hold the STOP/RESET keypad while
plugging in the oven.
Loading ...
Loading ...
Loading ...