Loading ...
Loading ...
Loading ...
To avoid unecessary service charges, check these suggestions before calling for service.
SUGGESTED SOLUTIONS
E(ement cyc)es on the highest setting _ This is normal. The temperature ((miter operates
automatically to protect the glass ceramic surface from
extreme high temperature damage.
Element cycles more than usual
Pan base is warped and not making full contact with the
heating surface.
Base diameter of pan is too small for the size of the
element.
Pan ingredients have boiled dry.
Matedal of pan is a poor heat conductor_ heat transfers
too slowly.
A slight odor is noticeable when an element is turned on . This is normal with new cooktops and will disappear
after several uses.
Cooktop controls wi(I not turn on
Replacement razor blades for the scraper
Cooking results are not what was expected
Replacement mTwisT dial for cooktop
Check the power source to see if a fuse has blown or if
the circuit breaker tripped.
Check power supply.
Cooktop panel is locked. Touch and hold PANEL LOCK
pad until indicator light turns off.
The scraper is packaged with single-edge, stainless steel
blades. Use a standard single-edge blade for
replacement.
The cooktop is not level.
Cooking pan does not fit the surface being used.
Cookware is not the type or size recommended.
If an additional dial is required, call !-800-944-2904 and
order replacement part #5060003783.
Page 30
Loading ...
Loading ...
Loading ...