Loading ...
Loading ...
Loading ...
W415-1596 / 11.25.15
45
EN
11.2 LAMP REPLACEMENT
This appliance comes equipped with our “Night Light™”. If in the event the lamp needs to be replaced, follow
these instructions.
A. Turn off all electrical supply.
B. Remove the glass door, see “DOOR
REMOVAL / INSTALLATION” section.
C. Unscrew the lens cover and lift the lamp
straight out. Replace with Wolf Steel Ltd.
parts only (W387-0013).
D. NOTE: Do not handle the lamp with
bare fi ngers, protect with a clean dry
cloth.
E. Replace lens cover.
F. Replace glass door.
37.1C
• Inspect all accessible gaskets and replace as required.
• Access the blower, if equipped and clean using a soft brush and vacuum.
• Re-assemble the various components in reverse order.
• Inspect the relief system. The appliance relieves through the main glass door. Ensure it opens freely and
seals when closed.
• Check the gas control valve pilot and Hi / Lo knobs move freely (if equipped) – replace if any stiffness in
movement is experienced.
• Check for gas leaks on all gas connections up and downstream from the gas valve including the pilot tube
connections.
Loading ...
Loading ...
Loading ...