Loading ...
Loading ...
Loading ...
W415-1596 / 11.25.15
33
EN
C. Align the hole in the
bottom of the front left
log (W135-0563) with
the screw and spacer
on the left side of the
burner. The middle of
this log rests against the
charcoal strip.
B. Place the charcoal
strip log (W135-0448)
on top of the grate
aligning the notches in
the charcoal strip with
the grate.
A. Place the rear log (W135-
0444) on rear bracket,
ensure the log is seated
properly on the rear bracket
and located on the center
pin.
7.3 LOG PLACEMENT
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT CHANGE OR MODIFY
FROM THE PROPER LOG POSITION, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
The individual logs can be easily identifi ed by the numbers cast on the underside of each log.
Phazer
TM
logs and glowing embers exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum
glowing effect. During the initial use of the appliance, log colours may vary. During the initial use of the
appliance the colours will become more uniform as colour pigments burn in during the heat activated curing
process.
!
WARNING
D. Align the hole in the bottom
of the front right log (W135-
0564) with the screw and
spacer on the right side
of the burner. The bottom
protrusion should rest along
the edge of the burner and
pulled forward until it rests
against the charcoal strip.
E. Align the holes in the
bottom of the right
log (W135-0447) with
the pins in the rear
and front right log.
F. Align the hole in the
bottom of the left log
(W135-0446) with the
pin in the rear log. Rest-
ing the right side of the
log against the burner.
G. Align the hole in the bottom of the front log (W135-0449) with the
pin in the charcoal strip. Rest the right side of the log against the
far right grate post.
Loading ...
Loading ...
Loading ...