Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
NOTE: DO NOT SECURELY TIGHTEN ALL BOLTS UNTIL STEP 8.
STEP 1
Attach the BASE FRAMES(1) to both sides of the BASE CROSS(4) with HEX BOLTS (M10x1.5x55mm)
(28), ARC WASHERS(M10)(34), and NYLOCK NUTS(M10x1.5)(40).
STEP 2
Slide the FOAM PADS(30) to both sides of the bar on the BASE CROSS(4).
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
(in the U.S.). Our Customer Care Sta is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
RIGHT
LEFT
Welded Nut
Welded Nut
Loading ...
Loading ...
Loading ...