Loading ...
Loading ...
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury°
Spiders and small insects can spin webs and
nest in the transit and
warehousing gas flow
obstruction around the
Burner FIRE"
can an
unsafe
To
as fo do this
at fall or
wheneve: and if
your grill extended
period of time
1 Remove the screws trom the rear oTeach Main Burner
using a Phillips Head Screwdriver
2 Carefully lift each Burner up and away from the Gas
Valve Orifice
3. Check and clean BurneriVenturi Tubes for insects and
insect nests A clogged tube can lead to a fire beneath
the grill
4 Refer to the figure below and perform one of these
3 cleaning methods:
[] METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris
TO CLEAN BURNER TUBE,
INSERT HOOK
HERE
Burner Port
Foot
..\
....Burner Tube
[] METHOD 2: Use a bottle brush with a flexible handle
and run the brush through the Burner Tube and
inside the Burner several times to remove any
debris
[] METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports
For safe operation ensure the Gas Valve Assembly
Orifice is inside the Burner Tube before using your
grill See figure. If the Orifice is not inside the Burner
Tube, lighting the Burner may cause explosion and!
or fire resulting in serious bodily injury andfor
property damage
Gas Valve Assembly Orifice
Burner Tube
To expedite the assembly process follow these
general guidelines:
[] Tools Required forAssembly :
= protective work gloves
" Phillips Head Screwdriver
[] For your safety, obtain assistance from another person
when assembling this gas grill
[] Use the Hardware and Part Diagrams to ensure all items
are included and free of damage
[]
Do not assemble or operate the grill if it appears dam-
aged, If there are damaged or missing parts when you
unpack the shipping box or you have questions during
the assembly process, call the:
Grill Information Center 1-888-317-7642
8am-8pm CST, Monday throuqh Friday
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with the National Fuel Gas Code,
ANSI Z223, !/NFPA 54, Storage and Handling of Liquefied
Petroleum Gases, ANSf/NFPA 58,Natural Gas and Propane
Installation Code, CSA B 149 I, Propane Storage and Han-
dfingCode, BI492
1. Do not store or use gasoline or other
flammable liquids or vapors in the vi-
cinity of this or any other appliances.
2. An LP cylinder not connected for use
shall not be stored in the vicinity ofthis
or any other appliance.
When using electrical appliances, basic safety
precautions should always be used,
• This appliance, when installed, must be electri-
cally grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22 t
• Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces
Loading ...
Loading ...
Loading ...