Loading ...
Loading ...
Loading ...
[]
[]
[]
[]
Main Burner Electrode Check
With the assistance of another person,
perform this Electrode Check before
proceeding.
This test wilt ensure that the Spark Electrode Tips
are propedy positioned so your grill lights easily
and properly.
Be sure a!l Control Knobs are set to "OFF" and
open the Grill Lid.
Have your assistant stand behind to the right of
the grill and look toward the front of the grill bowl.
Never put your face inside the Grill Head
Push and turn Burner Control Knob to _. and
you wilt hear a "clicking" sound as the burner
is being ignited Your assistant should see a blue
spark within each Gas Collector Box. If a spark
is present the Electrode Tips are properly po-
sitioned
if no spark is seen, the Spark Gap needs to be
adjusted as follows:
o tf the gap between the Spark Electrode Tip
and Receiver is more than 3!t6" use an
adjustable wrench to gently squeeze the
Gas Collector Box to narrow gap..
= Recheck the Electrode again, if no "clicking"
sound is heard:
AA Battery may be installed backwards
Electric wires may be loose Remove the AA
Battery and inspect the Ignitor Junction Box
found behind the Control Panel and reconnect
any loose wires
Infrared Burner and Rotisserie Burner
Electrode Check
[] Push and turn Infrared Burner Control Knob &
Rotisserie Burner Control Knob to,_.. Look for
spark between electrode tip and spark receiver
tip
[] If you don't see a spark from infrared Burner Elec-
trode or Rotisserie Burner Electrode, adjust gap
between electrode tip and spark receiver tip to 31
16 inch
Install Cooking Components
[] Place the Heat Diffusers above the Burners
The Heat Diffusers can only be placed corr_tty in
one direction, with the underside peg towards the
back ledge.
[] Place the Cooking Grids on the ledge above the
Heat Diffusers
[] Place the Secondary Cooking Rack into the slots
on Grill Bowl Side Panels
Secondary Cooking Rack
Cooking Grids ..................
Heat
31161'_Spark Gap Gas Collecto!
ilill.........lit21)!!illilll
t,\............... tJ ........... j!
tp Spark Electrode Tip
ark Receiver
Failure to read and follow the Use and Care
Instructions could result inafire orexplosion that
could causeserious bodily injury, death or prop-
erty damage,
When you have finished assembling your grill
be sure that all screws are tightened for safe
operation of your grill,
11
Loading ...
Loading ...
Loading ...