Loading ...
Loading ...
Loading ...
Install Transformer
[] Instati Transformer-Plug into Transformer-Socket and tighten securely,
(See Fig 1)
[] lnstat! Transformer to the Rear Cart Panel by using 4 Phillips Head
Screws 3t16"x1/2" and tighten using 4 Ftange Nuts 3116", (See Fig 2)
(You need to make 4 holes on your Rear Cart Panel first)
Pull the Transformer Cord out through the gap between the Rear Cart
Panel and the floor,
[] Plug Transformer Cord into a properly grounded outlet
Note: In case of light bulb failure replace with 12 volt 10W bulb only to avoid
damaging the electrical transformer
Phillips Head Screw
3It6 '_ x tt2"
Qty, 4
Part # $112G03081
Fiange Nut 3116"
Qty_ 4
Part # $313G03051
Wire --,,
Transformer-socket ..... '"_t._!
Transformer-plug ---,
Fig
Install ignitor Battery
[] Unscrew Ignitor Cap from Control Panel
[] Place supplied AA battery into the Ignitor Slot with positive pole
facing you,
[] Position the Cap and Spring over the AA battery and tighten onto
Control Panel,
AA Batter
Ignitor
Spring
Ignitor Slot
10
Loading ...
Loading ...
Loading ...