Loading ...
Loading ...
Loading ...
54
TO CANCEL THE DELAY TIMER FUNCTION
1. Open the door of the dishwasher.
2. Press and hold Delay Timer key for 3 seconds.
3. At the end of 3 seconds, delaying process will be canceled.
• If the program is changed, the delay timer is canceled.
• Delay Timer function can not be set after the program starts.
STARTING THE PROGRAM
• First, open the door of the dishwasher. In order to start the dishwasher after
selecting the program and auxiliary functions, press the Start/Pause + On/
Off key. Once the program starts, the estimated time remained to the end of the
program will appear on the display.
• The dishwasher performs water softening depending on the hardness level of the
supply water. Remaining time displayed towards the end in some programs can
be different from the time indicated at the beginning due to this process. The total
time can also change while the program is running depending on the ambient
temperature where the dishwasher is installed, temperature of the supply water
and amount of the dishes.
• Pay attention not to open the door of the dishwasher when it is running. Stop the
dishwasher by pressing Start/Pause key as soon as the door of the dishwasher is
opened. In other situation, the dishwasher will stop automatically after 4 seconds
when the door of the dishwasher is opened and any key is not pressed. To start a
program, Start/Pause key is pressed and close the door of the dishwasher within
4 seconds.
• If the door is opened while the dishwasher is running, the dishwasher will switch
to the standby mode. Press Start/Pause key and close the dishwasher door
within 4 seconds, then the program will resume.
CANCELING THE PROGRAM
1. Press program Selection + Cancel key for 3 seconds to cancel the program.
2. After 3 seconds, “1” will appear on the display. For a couple of minutes the
dishwasher will fulfill the necessary operations required to cancel the program.
• There might be residues of detergent or rinse aid left in the dishwasher and/or on
the pieces being washed depending on what step the canceled program was in.
OPERATION
Starting the Program
Loading ...
Loading ...
Loading ...