Loading ...
Loading ...
Loading ...
17
3. Check the size of the sink’s drain hose connector. If needed, cut the drain hose so
its end fits onto the sink connector (5/8", 3/4", or 1" - as shown below). If the
end of the drain hose does not fit onto the drain hose connector of the sink, use
an adapter, purchasable at a plumbing/hardware supply store.
4. Slide a hose clamp over the end of the drain hose. Attach the drain hose to the
sink connector, slide the hose clamp to the end of the hose, and then tighten the
hose clamp.
Note: Use a hose clamp. Failure to do so may cause water leakage.
INSTALLATION
Drain Hose Connection
If necessary, cut off the
dotted line of the drain
hose to fit the size.
Use hose clamp for
drain hose assembly to
the sink.
Loading ...
Loading ...
Loading ...