Loading ...
Loading ...
/_ SEVERE WARNING SIGNS
WA.N,NGFOR INSTALLATION
Do not install the refrigerator in a damp
place or place where it may come in
contact with water.
Deteriorated insulation of electrical parts may
cause an electric shock or fire.
Do not place this refrigerator in direct sunlight
or expose to the heat from stoves, room
heaters or other appliance.
Do not plug several appliances into the same
multiple power strip. The refrigerator should
always be plugged into its own individual
electrical outlet which has a voltage rating that
matches the voltage listed on the refrigerator's
rating plate.
This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fire hazard from
overheated wires.
If the wall socket is loose, do not insert the
power plug.
There is a risk of electric shock of fire.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
Do not bend the power cord excessively or
place heavy articles on it.
Do not twist or tie the power cord.
Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
When moving the refrigerator, be careful not to
roll over or damage the power cord
This may result in an electric shock or fire.
Never unplug your refrigerator by pulling on the
power cord. Always grip plug firmly and pull
straight out from the outlet.
Damage to the cord may cause a short-circuit,
fire and/or electric shock.
Do not use aerosols near the refrigerator.
Aerosols used near the refrigerator may cause
an explosion or fire.
Do not install this appliance near a heater,
inflammable material.
Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where
gas may leak.
This may result in an electric shock or fire.
This refrigerator must be properly
installed and located in accordance with
the manual before you use it.
Connect the power plug in the proper position
with the cord hanging down.
If you connect the power plug upside down,
the wire can get cut off and cause a fire or
electric shock.
When moving the refrigerator, be careful not to
roll over or damage the power cord.
This constitutes a fire hazard.
Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
Keep the packing materials out of reach of
children.
There is a risk of death from suffocation if a child
puts the packing materials on his or her head.
The appliance must be positioned so that the
plug is accessible after installation.
You need to remove all the protective plastic
film before you initially plug the product in.
[_ The refrigerator must be safely
grounded.
Always make sure that you have
grounded the refrigerator before
attempting to investigate or repair any
part of the appliance. Power leakages
can cause severe electric shock.
Never use gas pipes, telephone lines or other
potential lightning attractors as an electrical
ground.
Improper use of the grounding plug can result
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-120 V,
10 A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.
Z_ INSTALLATION CAUTIONS
CAUTION
Allow sufficient space to install the
refrigerator on a flat surface.
If your refrigerator is not level, the internal
cooling system may not work correctly.
Engl sh- 3
Loading ...
Loading ...
Loading ...