Loading ...
Loading ...
Loading ...
Section 1: Dispense Water (How to Dispense Water)
Section 2: Replenish Water
Manual replenishment of the feed water tank
Automatic replenishment of the purified water tank
● During use, when L1 is displayed on the screen, the feed water tank is in a water
shortage state. The “ ” button will not be available at this time.
● When the built-in purified water tank is short of water during normal use, the
machine will automatically enter water replenishment mode. At this time, the display
screen will display a countdown of 99 seconds and the “ ” indicator light will be
on.
● Please remove the feed water tank, pour out the concentrated water, add water
again, and put the feed water tank back into the machine.
Note: The water cannot be directly poured into the feed water tank. Otherwise, the
RO filter life may be shortened or the machine may break down.
Capacity adjustment
Dispense water
There are 4 capacity options (4 OZ, 8 OZ, 16 OZ, and Manual). Touch the Volume
button to choose the capacity you need.
Display and Operation
4 OZ 4 OZ
8 OZ
16 OZ
Manual
After selecting the amount of water you want, press the button “ ” for a short
time to get water. Press it again to stop getting water.
When the capacity options of 4 OZ, 8 OZ, or 16 OZ is selected, the system will
automatically stop dispensing water after the selected water capacity flows out.
Start
/ Off
When you select Manual, the water capacity should be controlled according to your
needs. When the required water capacity is obtained, the button
“ ” should be pressed to stop dispensing water.
Note: The maximum water output on Manual operation is 50 oz.
Start
/ Off
Start
/ Off
Pump
Loading ...
Loading ...
Loading ...