Loading ...
Loading ...
Loading ...
Error messages
Display Fault Measure
(_ flashes Door not closed properly. Check to be sure no laundry is caught in the washer
door. Close the door securely.
Cold water tap not turned on. Turn on the cold water tap.
Supply hose for cold water kinked Eliminate the cause, replace the hose if damaged.
or pinched closed.
Strainer in water supply hose Clean the water inlet strainer.
clogged. --> Cleaning the water inlet strainers; Page 28
Cold water pressure too low. Eliminate the cause.
E:93 Hot water tap not turned on. Turn on the hot water tap.
(Displayed at end of Supply hose for hot water kinked or Eliminate the cause, replace the hose if damaged.
first cycle without hot pinched closed.
water. Not displayed in Hot water pressure too low. Eliminate the cause.
subsequent cycles if
hot water is not avail- Strainer in water supply hose Connect both supply hoses (hot and cold water) for
able. Reset after sec- clogged, hot water appliances. ---> Water connections; Page 13
ond cycle with hot
water)
E:32 Not a fault - the unbalanced load Distribute small and large items of laundry evenly in
(alternating display with detection system has interrupted the drum. If necessary, start an additional spin pro-
END when program is the spin cycle because the laundry gram.
finished) is unevenly distributed.
E: 18 Too much detergent used or non- Use less detergent for future loads. Only use HE deter-
HE detergent used. _ displays at gents.
end of cycle. ---> Your washing machine is intended for; Page 5
Pump is blocked (obstructed). Clean the washer drain hose and/or the drain pipe.
May need to perform pump maintenance to clear
blockage.
---> Cleaning the drain pump; Page 28
Others Turn off machine, wait 5 seconds and turn on again. If
the display shows again, call customer service.
Customer service
Contact the Customer Service department if your
appliance needs repair. Our representatives will be
happy to provide details for an authorized service
provider close to you.
E-Nr. and FD (serial) number:
When you contact Customer Service, please have the E-
Nr. (model number) and the FD (serial) number for your
appliance available. You can find the identification plate
with these numbers on this information on inside of the
appliance door or on the back of the appliance.
Questions? Please contact us. We look forward to
hearing from you!
1-800-944-2904
www.bosch-home.com
1901 Main Street, Suite 600
Irvine, CA 92614
33
Loading ...
Loading ...
Loading ...