Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 15ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 14
Dimmer Curve - This will let select your desired
dimmer curve. See the dimmer curve chart on page 30 for
more information.
1. Press the either the MENU button until “Dimmer Curve” is dis-
played, press ENTER. 1 of 5 dimmer curves will be displayed.
2. Press the UP or DOWN buttons to nd your desired dimmer curve
and press ENTER to conm and exit.
Pan Invert
1. Press the MENU button until “Pan Invert” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
“Yes” is displayed, press ENTER to conm. To deactivate Pan inver-
sion, select “No” and press Enter.
Tilt Invert
1. Press the MENU button until “Tilt Invert” is displayed, press
ENTER. Either “Yes” or “No” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons until
“Yes” is displayed, press ENTER to conm. To deactivate tilt inver-
sion, select “No” and press Enter.
Back Light - With this function you can have the LED
display turn off after 10 seconds.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at all
times, or “OFF” to switch to have the LED display switch o after 10
seconds.
3. Press ENTER to conrm. To make you LED display reappear again
press any button.
Pocket Pro System Menu
Sound Sense - In this mode you can adjust the
sound sensitivity.
1. Press the MENU button until “Sound Sense” is displayed, press
ENTER.
2. A number between 0-100 will be displayed. Press the UP or DOWN
buttons to adjust the sound sensitivity. 0 being the least sensitive,
and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to conrm.
DMX State - This mode can be used as a precaution
mode, that in case the DMX signal is lost, interrupted, or
power is lost, the operating mode chosen in the setup is the
running mode the xture will go into when the DMX signal is
lost. You can also set this as the operating mode you would
like the unit to return to when power is applied.
1. Press the MENU button until “DMX State” is displayed, and either
“Master/Slave”, “Blackout”, or “Last State” will be displayed beneath.
2. Press ENTER and the bottom choice will begin to ash. Use the UP
or DOWN buttons to choose an operating mode you would like the unit
to start up in when power is applied or the DMX signal is lost.
• Last State - If the DMX signal is lost the xture will stay in the last
DMX setting. If power is applied and this mode is set, the unit will auto-
matically go into the last DMX set up.
• Master/Slave (Show Mode) - If the DMX signal is lost, interrupted, the
unit will automatically go into show mode.
• Blackout - If the DMX signal is lost or interrupted, the unit will auto-
matically go into stand by mode.
3. Press ENTER to conrm your desired set up.
Pocket Pro System Menu
Loading ...
Loading ...
Loading ...