Loading ...
Loading ...
Loading ...
Pocket Pro Cleaning
Pocket Pro Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to
optimize light output. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Pocket Pro Fuse Replacement
Disconnect the power and remove the unit’s power cord. Once the
cord has been removed locate the fuse holder above the power con-
nection. Using a phillips head screwdriver, unscrew the fuse holder.
Remove the bad fuse and replace with a new one. Screw the fuse
holder back into place.
ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 32 ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 33
Pocket Pro Remove the Head Casing
Unscrew the single screw
Flip the top cover back
Unscrew the 4 screws
located on the other side
Loading ...