Loading ...
Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Pocket Pro Instruction Manual Page 7
Screw one clamp via a M12 screw and nut to the included bracket.
Attach the bracket using the included screws to the bottom of the
Pocket Pro. Pull the safety-cable through the side holes located
underneath the handels. Run the safety cable over the trussing
system or a safe xation spot. Insert the end in the carabine and
tighten the safety screw.
NOTICE: The suitable enviromental temperature for this lighting x-
ture is between -25˚ C to 45˚ C. Do not place this lighting xture in an
enviroment where the temperatures are under or above the tempera-
tures stated above. This will allow the xture to run at its best and
help prolong the xture life.
Pocket Pro Mounting
The Pocket Pro is fully operational in three dierent mounting posi-
tions, hanging upside-down from a ceiling, mounted sideways on
trussing, or set on a at level surface. Be sure this xture is kept
at least 0.5m away from any ammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure
to prevent accidental damage and/or injury in the event the clamp
fails (see next page).
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
Pocket Pro Mounting
Loading ...
Loading ...
Loading ...