Loading ...
Loading ...
Loading ...
7. Fan Assembly.
Carefully push wiring and wire
connectors into outlet box. Leave
hook end of motor assembly in
square opening of hanging bracket
and lift the other end of motor
assembly toward hanging bracket.
Align motor assembly screw holes
with hanging bracket screw holes
and, using motor mounting screws,
secure motor assembly with a Phillips
screwdriver.
8. Motor Housing Assembly.
Hold motor housing up to hanging
bracket to determine which 2 screws
align with slotted holes on top rim of
motor housing. Put motor housing
down and partially loosen the 2 screws
in the hanging bracket that correspond
to slotted holes in the motor housing.
Remove the other 2 screws from the
hanging bracket.
Raise motor housing to hanging
bracket, allowing slotted holes in motor
housing to align with loosened screws
in hanging bracket. Twist motor
housing to lock. Re-install the 2 screws
that were removed and then tighten all
4 screws to secure motor housing.
page 5
motor
mounting
screws
motor
mounting
screw
motor
housing
screws
motor
housing
screws
motor
housing
motor assembly
motor assembly
hanging bracket
hanging
bracket
Loading ...
Loading ...
Loading ...