Loading ...
Loading ...
Loading ...
Pass the
refrigerator
Before
installation
Passthe refrigeratorlaterallythroughthe access
dooras shown inthe right figure,
Door replacement
Mount them inthe reverse sequence of removal after they passthrough the access
door.
Feed water pipe installation
• Automatic ice maker operation needs water pressure of 147-834 kPa (1.5-8.5
kgr/cm2)(That is, an instant paper cup (180 cc) will be fully filled within 3 sec.).
• If water pressure does not reach the rating 147 kPa(1.5 kgf/cm2)or below, it is
necessary to purchase a separate pressure pump for normal automatic icing and
cool water reed.
• Keep the total length of the feed water pipe tube within 8 m and be careful for the
tube not be bent. If the tube is 8 m or longer it may cause trouble in water feed
owing to the drain water pressure.
• Installthe reed water pipe tube at a placefree from heat.
Warning • Connect to potable water supply only.
• Refer to instructions with water filter kit for installation.
Loading ...
Loading ...
Loading ...