Loading ...
Loading ...
Loading ...
Freezer
compartment
lamp
Dispenser lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
After dispenser
is used
How to dismantle parts
Separatethe lamp bypullingit out (®)while
slightlystriking((1))and rotating ((9)the lamp
cover,
Turnthebulbcounterclockwise,Max.40W bulb
for refrigerator is usedand can be purchasedat
a service center.
Seperate the lamp by pulling it out, and then
remove the lamp. Max. 15 W bulb for
refrigerator is used and can be purchased at a
service center.
To remove a shelf, lift the left partof the shelf
a bit, push it to the direction (0), lift the right
partto the diretion (®),and take it out.
Lift the door rack holding both sides ((b) and
pull it out to (®)direction.
Holdthe icestorage bin as shown inthe right
figure and pullit out (®)while slightlylifting it
(®).
• It is recommended not to dismantle the ice
storage bin unless it is necessary.
• Be sure to use both handswhen removing
the ice storage bin,so as not to drop it on the
floor.
• If the icestorage bin does not fit well, slightly
rotate the rotating device.
The water collector hasno self-drainage
function. Soit should becleaned regularly.
Remove the cover by pressing the left side of
water collector cover and dry it with a cloth.
Press the point marked asshown in the figure
to the right to remove the water collector
cover.
y devicteng
Loading ...
Loading ...
Loading ...