DZGX3100E User Manual

Loading ...

English

124

8 Click “Write” to create a DVD-Video.

Clicking “Write” will display the screen for

writing.

Check “Create disc”, perform setting for

write, such as choosing DVD write drive, and

then set a blank DVD-RW/DVD-R into the

drive.

Clicking “Preview” will allow you to check

any image of DVD to be created.

Click the “Write” button: The screen for

setting write will appear. After checking the

settings, click “OK”: Writing will start.

When write is complete, the drive will open

to eject the DVD: Creation of an original DVD

is now finished.

Note:

• If you load a written DVD-RW in the write drive, the

dialog “Are you sure you want to delete the content of

disc?” will appear.

Deleting the content of disc will erase all data on the

disc: Carefully check the contents of disc.

Choosing “Yes” will display the screen for choosing

the disc erasure method: After checking it, click the

“OK” button. Once the contents on disc have been

deleted, the cover of disc insertion block on DVD

video camera/recorder will open. Close the cover

following the message instruction.

• If the disc contains a video file that does not conform

to DVD-Video format, the video will be re-encoded,

resulting in deterioration of image quality.

• If you execute “File” - “Save project”, the halfway

operation status can be saved as a project file.

Reading in this saved project file will allow you to

restart the operation from the saved status.

• A project file will be saved in the project folder that

was set in step 4 on page 122, and the file name will

be automatically attached.

Click

Loading ...

User Manual - Page 124