Loading ...
Loading ...
Loading ...
8
2. Attach the Upright (77) to the Base (80) with
two 3/8" x 5 1/2" Screws (5) and a 3/8" x 2 3/4"
Screw (17) with three 3/8" Star Washers (8)
as shown. Start all three Screws, and then
tighten them. Be careful not to pinch the
Upright Wire (not shown) in the Upright.
Attach the other Upright (not shown) as
described above. Note: There is not a wire on
the left side.
2
77
17
80
8
5
8
3
89
37
A
A
3. Set the Console (37) face down on a soft sur-
face to avoid scraching the Console. Remove
and discard the four screws (A) from the
Console Base Back (89). Lift off the Console
Base Back.
Loading ...
Loading ...
Loading ...