Loading ...
Loading ...
Loading ...
15
ENGLISH
DUCTING & EXTRACTION LEVELS
(REMOTE MOTORS ONLY)
The Flexi ducting is designed to ensure optimum performance for your range-
hood. Please follow the installation instructions carefully.
Every FALMEC rangehood must be ducted to the external or in-roof motor unit
by the use of non-flammable ducting. The rangehood must not be ducted into a
wall cavity or a ceiling space where a build-up of grease can occur and become a
potential fire risk. Ensure the external outlet on the motor unit unit is not covered
and the air flow is not restricted in any way as this may result in reduced perfor-
mance. The duct must at all times have a cross sectional surface area equivalent
to the hood outlet. The hood outlet has a circular cross section of 200 mm in
diameter or an approximate area of 31,400 mm². Do not reduce the duct size at
any time and avoid sharp bends. If the duct run is longer than five (5) metres, it
may be necessary to enlarge the duct size to ensure optimum performance. The
manufacturer does not guarantee performance when the duct length is greater
than five (5) metres.
THE RECOMMENDED DUCT LENGTH INSTALLATION DISTANCE IS 4 ME
TERS.
THE MINIMUM INSTALLATION DISTANCE IS 3 METERS.
GENTLE BENDS IN THE DUCTING ARE RECOMMENDED AS IT ASSISTS IN
MUFFLING NOISE FROM THE EXTERNAL FAN UNIT.
SERVICING
The installation and fitting of the external or in-roof motor should be done in
such a way that will allow the unit to be removed if service is required. Additional
costs incurred in the removal, such as damage to walls and roofs, are not covered
under warranty.
The external and in-roof motors unit should be checked regularly to ensure
that nothing is obstructing the air flow from the housing. We also recommend
a routine inspection of the remote units every 12 months to ensure optimum
performance.
As part of ensuring the maximum life cycle of the remote motors it is advised to
clean the baffle filters on the rangehood every 4 weeks.
These filters are easily removable and dishwasher safe.
PART 1: HOOD INSTALLATION GUIDE
INTEGRATED HOODS - REMOTE MOTOR
INTEGRATED HOOD
Models include MILANO:
F3ML60S1, F3ML90S1, F3MLD90S1, F3MLD12S1
and GENOVA F3GV12S1
WARNING
DIMENSIONS ARE ACCURATE AT THE TIME OF PRINTING, PR KITCHEN &
WASHROOM SYSTEMS PTY LTD RESERVES THE RIGHT TO CHANGE SPECI
FICATIONS WITHOUT NOTICE.
FOR BUILDING PURPOSES THE UNIT SHOULD BE PROVIDED TO THE CA
BINET MAKER / BUILDER / KITCHEN DESIGNER FOR EXACT MEASURE
MENTS.
THE MINIMUM INSTALLATION DISTANCE IS 3 METERS.
GENTLE BENDS IN THE DUCTING ARE RECOMMENDED AS IT ASSISTS IN
MUFFLING NOISE FROM THE EXTERNAL FAN UNIT.
SERVICING
The installation and fitting of the external or in-roof motor should be done in
such a way that will allow the unit to be removed if service is required. Additional
costs incurred in the removal, such as damage to walls and roofs, are not covered
under warranty.
The external and in-roof motors unit should be checked regularly to ensure
that nothing is obstructing the air flow from the housing. We also recommend
a routine inspection of the remote units every 12 months to ensure optimum
performance.
As part of ensuring the maximum life cycle of the remote motors it is advised to
clean the baffle filters on the rangehood every 4 weeks.
These filters are easily removable and dishwasher safe.
To Rangehood Unit
Gentle Bend
In Ducting
Loading ...
Loading ...
Loading ...