Loading ...
Loading ...
Loading ...
en Basic operation
8
3.
Install the burner head so that the thermocouple
and spark plug are located in the corresponding
slots of the burner head.
!
!
4.
The catching pin on the outer ring cap must fit into
the corresponding slot on the burner head.
5.
The catching pin on the inner ring cap must fit into
the corresponding slot on the burner head.
8.2 Using suitable cookware
1.
Only use cookware with a suitable diameter.
2.
Ensure that the cookware does not protrude over
the edge of the cooktop.
8.3 Starting the hob
Note:Ensure that there is no leakage before operation.
1.
Place a suitable pan on the pan support.
2.
Choose the corresponding burner control knob.
Press and turn it anti-clockwise to the ignition posi-
tion and hold it there for a few seconds.
a The burner ignites.
3.
Turn the control knob anti-clockwise to the position
you require.
a The power of the burner flame will change accord-
ingly.
8.4 Starting the hob after safety switch-
off
Requirement:The safety device shuts off the gas sup-
ply to the burner if the flame is unintentionally extin-
guished.
1.
Turn the control knob to turn off the hob.
2.
Restart the hob as normal.
8.5 Switching off the hob
▶
Turn the knob clockwise to the OFF position.
a The appliance electronics shut off the gas supply.
Loading ...
Loading ...
Loading ...