Loading ...
Loading ...
Loading ...
instructions
12
INSTRUCTIONS
12
Wi-Fi LED Status
Pairing Mode & Standby Mode
Solid Light
The OxyPure is paired with the
Wi-Fi and ready to be used.
Rapid Blinking Light
The OxyPure is in Pairing Mode.
The OxyPure will remain in Pairing
Mode for up to 3 minutes, or until
your device is paired.
Slow Blinking Light The OxyPure is in Standby Mode.
No Light The OxyPure’s Wi-Fi is off.
Note: If the light on your unit is blinking slower, the unit is in
WiFi Standby Mode. To exit Standby Mode and initiate the
Pairing Mode, press and hold power for 2 seconds until the
WiFi light begins blinking rapidly.
Note: The OxyPure, as with most IoT devices (computing
devices), will only connect to a 2.4GHz* network.
• To reset the OxyPure WIFI, press and hold down “Power”
for 3 seconds. Follow step 4 (from previous page). The
OxyPure can now be operated from any location.
*Most routers will broadcast in 2.4GHz. If you need help
activating 2.4GHz, contact your ISP (Internet Service Provider).
/WIFI CONNECTION
Loading ...
Loading ...
Loading ...