Loading ...
Loading ...
Loading ...
DispenserLight(Somemodels)
Alightis activated when dispensing ice or water. Some
models feature a night light.
• Deactivate night light by pushing switch, located
underneath dispenser and left of ice dispenser bar.
Night light
switch
Taste and Odor
Observe the following to minimize taste and odor
difficulties:
• Discard first 3 harvests of ice after initially
connecting refrigerator to household water supply
and after extended periods of non-use. This will
prevent the consumption of any impurities left in the
line or use of off-taste ice.
• Wrap foods in tightly sealed containers or moisture
proof bags.
• Install water filter on water line.
• Contact local water treatment company for
specialized help if difficulties persist.
• Discard ice if left unused for an extended period.
Care and Cleaning
_, WARNING: To avoid electrical shock which can
cause severe personal injury or death, disconnect
power to refrigerator before cleaning. After cleaning,
connect power.
,_ CAUTION: To avoid personal injury or property
damage, read and follow all cleaning product
manufacturer's directions.
General Cleaning
1. Wash interior and exterior surfaces with 4
tablespoons baking soda dissolved in 1 quart warm
water and a soft, clean cloth.
2. Rinse surfaces with warm water. Dry surfaces with a
soft, clean cloth.
• Do not use the following items:
- abrasive or harsh cleaners, ammonia, chlorine
bleach, etc.
- concentrated detergents or solvents
- metal scouring pads
These items can scratch, crack and discolor
surfaces.
• Do not place buckets, shelves, etc. in dishwasher.
Adhesives
1. Remove glue residue by rubbing toothpaste into
adhesive with fingers until adhesive loosens.
2. Rinse surface with warm water. Dry surface with a
soft, clean cloth.
Door Gaskets
1. Clean door gaskets every 3 months according to
"General Cleaning" instructions above. Clean any
spills immediately.
2. Apply a light film of petroleum jelly to keep gaskets
pliable.
Condenser Coils
Clean condenser coil every 3 months to ensure
maximum performance of refrigerator. Accumulated dust
and lint may cause the following:
• reduced cooling performance
• increased energy usage
• premature compressor failure
1. Remove lower front toe grille by holding ends and
pulling forward.
2. Clean front surface of condenser coil with a vacuum
cleaner hose nozzle.
3. Replace toe grille by inserting clips in holes and
snapping in.
15
Loading ...
Loading ...
Loading ...