Loading ...
Loading ...
Loading ...
3. Locate the crank assembly re-
moved earlier. Remove the Iocknut
and flatwasher from the eye bolt
assembly.
4. Install the eye bolt through the low-
er hole on the left side of the han-
dles.
5. Install the flatwasher and the lock-
nut loosely on the eye bolt.
6. Carefully remove cotter pin, clevis
pin, universal joint pin, and uni-
versal joint from the crank rod as-
sembly. See Figure 6.
Cotter Pin
Clevis Pin
Crank Rod
.
Mount the universal joint intothe
end of the worm gear. Make sure
the large holes are aligned.
8. Insert universal joint pin. Make
sure opening in universal joint pin
is aligned with small opening in uni-
versal joint.
9. Mount the yoke end of crank rod
around the universal joint. Fasten
with clevis pin and cotter pin.
Spread ends of cotter pin to lock in
place.
10. Tighten the Iocknut on the eye bolt.
See Figure 5. Make sure eye belt is
properly aligned and the crank can
freely rotate.
11. Tighten all handle fasteners.
Universal
Joint Pin
Universal Joint
Worm Gear
Figure 6
How To Install The Knobs
Remote Chute Knob
1. Install the nut onto the lever. See
Figure 7,
Lip _.... _
Remote
Chute
Knob
Nut
3/8"_...__ Lever
Figure 7
2. Assemble the remote chute knob
onto the lever until snug against the
nut.
F-OO1129J
,
4.
Make sure lip on the remote chute
knob is pointed toward the engine.
Tighten the nut against the bottom
of the remote chute knob.
Speed Select Knob
Install the speed select knob to the
speed select lever. See Figure 8.
Speed Select
Knob
9
Speed Select
Lever
Figure 8
Loading ...
Loading ...
Loading ...